Mechanical ventilation cooling tower manufacturers: cooling tower composition

Mechanical ventilation cooling tower manufacturer: water filling

The water to be cooled (hot water) is sprinkled into water droplets or forms a water film many times, increasing the contact area and time between water and air, and promoting the heat exchange between water and air. The cooling process of water is mainly carried out in the spray filler.

Mechanical ventilation cooling tower manufacturer: water distribution system

Hot water is evenly distributed on the whole water filling, and whether the hot water is evenly distributed has a great influence on the cooling effect. If the water is not evenly distributed, it will not only directly reduce the cooling effect, but also cause some cooling water droplets to splash out of the tower.

Mechanical ventilation cooling tower manufacturer: ventilation equipment

In mechanical ventilation cooling towers, fans are used to generate the desired airflow to ensure the desired cooling effect.

Mechanical ventilation cooling tower manufacturer: air distribution device

Air intakes, shutters and deflectors are used to guide the air evenly distributed over the entire section of the cooling tower.

Mechanical ventilation cooling tower manufacturer: ventilator

The role of the ventilation duct is to create good aerodynamic conditions, reduce ventilation resistance, send the hot and humid air discharged from the cooling tower to the high altitude, and reduce the return of hot and humid air.

The ventilation pipe of the mechanical ventilation cooling tower is also called the air pipe. The ventilation pipe of the natural ventilation cooling tower plays the role of ventilation and transporting hot and humid air to the sky.

Mechanical ventilation cooling tower manufacturer: water separator

The water droplets carried in the discharged hot and humid air are separated from the air, reducing the loss of escaped water and the impact on the surrounding environment.

Mechanical ventilation cooling tower manufacturer: tower body

The external envelope structure of the cooling tower, the tower of the mechanical ventilation cooling tower and the wind-type natural ventilation cooling tower are closed, and have the function of supporting, maintaining and organizing the appropriate air flow; The tower body of the open cooling tower is made open along the tower height, and the natural wind can enter the tower body.

Mechanical ventilation cooling tower manufacturer: catchment pool

Located at the lower part of the cooling tower, the cooling water from the dripped filler is collected. Sometimes the collection tank also has a certain spare volume, which plays a role in regulating the flow rate.

Mechanical ventilation cooling tower manufacturer: water transmission system

The inlet pipe delivers hot water to the water distribution system, and the inlet pipe is provided with a valve to adjust the water intake of the cooling tower, and the outlet pipe transmits the cooling water to the water equipment or circulating pump. Auxiliary water pipe, sewage pipe, overflow pipe, ventilation pipe, etc. It is also installed in the collecting water tank, and if required, connecting pipes can be set up between multiple cooling towers.

Mechanical ventilation cooling tower manufacturer: Other facilities

Including access door, access ladder, walkway, lighting, electrical control, lightning protection devices, if necessary, flight barrier signs. Sometimes, cooling tower test components are also set up for testing needs.

Different combinations of the above components constitute cooling towers in various forms and uses: open drip cooling towers, cylinder natural ventilation cooling towers, ventilation (or blast) countercurrent cooling towers, ventilation cross-flow cooling towers, etc.